身近にはないと思っていた三角ネジがあって、これを回すドライバーを持っていないので自作した。三角ドライバーは製品として売られているようだが、使用頻度が少なく、工作が好きで買った工具もあり、知人も自作したというので自作にトライしてみた。
There was a triangle screws that were thought not in my close. I do not have a driver for triangle screws. Triangle driver is sold as a product. However, the use frequency is small and you have a variety of tools, that friend was also made. So I decided to make on your own.
普通はマイナスか十字、時たま六角の星型のネジを見るが、三角のネジは今回初めて見る。十字ドライバーでは空回りしてまわせない。
撮影の際、ドライバーのように立てようとも思ったが、寝かせて撮ることにした。
Usually negative or cross, but occasionally look at the hexagon of star-shaped screws, I see for the first time this triangle screws. The screw can not turn by spin in Phillips screwdriver. When shooting, I thought even trying to vertical as the driver, it was decided to take in the horizontal.
十字ドライバー先端を金属用のノコで切り落とし、先を2mmの正三角形に手動グラインダーで削った。
ドライバーを撮る際、ドライバーの柄をダブルクリップで挟んで足にして黒模造紙の上に立てた。
I cut off the tip of the Phillips screwdriver with a saw for metal. And, I cut the tip in the grinder, and was the cross-section in an equilateral triangle of 2mm.
I took a picture with stands upright a screwdriver in black paper. I put a clip to the driver to be stands upright.
平ヤスリで削ると丸みを帯びてしまうので、手動グラインダーを使用。グラインダーは長い間使っていなかったので回転が重かったので、分解し油を注入。漏れた油がグラインダーの表面に付いて、使い込んだ工具のように見える。赤い工具が多いように思える。赤だと目立つからのようだ。
Since not flat scraped with sparking file, I was using the grinder. I did not use it for a long time, and grinder rotation was heavy. I decomposed the grinder and injected oil. Leaked oil is attached to the surface of the grinder, it looks like a tool that embezzled. I seems like red tool often. It is because noticeable that it is red.
D800 + AF-S Micro Nikkor 60mm F2.8G ED + speedlite with reflector
最近のコメント